Millions of people are getting set to chill down and splash about this summer. With that being stated, few things are more disheartening than getting ready to jump into a pool on a hot summer day only to discover it’s unclean or broken. You can prevent these difficulties and have a worry-free summer by learning about the most frequent pool problems and how to care for a pool. So let’s check out what are the most common pool issues and how to fix them effectively and enjoy the summer.
If you find in your pool water a wonderful shade of green, your pool has most likely developed a large crop of algae. The most likely cause is that you neglected to test the water, and the chlorine level in your pool has gone below the amount required to prevent algae development. Algae is one of the most common problems that pool owners encounter. Black spot algae, on the other hand, are the most difficult to eradicate of all the algae varieties. Thankfully, expert treatments of removing dark colored algae can solve the problem fast and easily without draining the pool. These long-lasting therapies also aid in the prevention of recurrence. It’s critical to address this as soon as possible since if black spot stains are left unattended for more than 2-3 years, algae roots can reach the pool interior and permanently discolor your pool surface.
If the water in your pool is cloudy, you’re probably dealing with bacterial growth. You probably neglected to check to determine whether your pool water was low on chlorine, just like you did with the algae problem. Because chlorine eliminates germs, it is extremely vital.
Make sure to test your pool’s water and add chemicals according to the manufacturer’s instructions.
Your pool filter should be checked and maintained regularly, because if the filter is unclean, it may become useless. If your filter appears to be working but your water is green or hazy, double-check your filter after testing the water. If there is a lot of pool usage or if there are environmental concerns, the filter will get dirty faster. If there is a lot of pollen or tree blooms dropping into the pool, the filter will need to be cleaned more often. Moreover, wind can blow extra dust and grime into the pool. All of these elements might have an impact on the efficacy of your pool filter.
Imagine getting out of the pool and discovering that your toes are red and swollen. Swimming on a rough pool floor is bad for the swimmer’s feet and bathing suit. It’s possible that the scratchy surface is due to who installed your pool and what material they chose. Calcium build-up, on the other hand, is more likely to be the culprit. The same pH test is used to determine this.
Irritability in the eyes, throat, ears, skin and other areas might result from an untreated pool. This is caused by a pH imbalance. Chloramines, a mixture of chlorine and ammonia, produce the discomfort that many swimmers experience. Test pH levels once again to ensure they’re within the acceptable range of 7.2-7.6. This is the maximum amount of stress our bodies can tolerate. Anything that is higher or lower than those values will result in redness and burning.
Concrete walls, flooring, and pool decks that are cracked can injure you and your children. Patching the minor cracks will solve the problem. Drain the water until it reaches the level below the fracture. Then, to remove any loose edges, expand them slightly and repair them with cement. Longer fractures, on the other hand, may indicate structural issues that are beyond the scope of simple latching. Digging is the only way to remedy these fissures.
The wear on the filter and pump O-rings should be checked regularly. The big O-ring situated between the filter body and the filter head is the one that wears out the most.
Water will flow from the filter if the O-ring is damaged. To increase the life of the replacement O-ring, add lubricant to it before installing it.
Finally, these pool issues aren’t as uncommon as you would believe. Keeping up with pool care is the key to avoiding issues and costly repairs to your pool and equipment. Spending a few minutes each day to test the water and, if required, adding chemicals will save you hours of cleaning time afterward. Hopefully, these tips will help you find the core of your issue and fix it in the most effective manner possible.